manualshive.com logo in svg

Midas DL451, Operator'S Manual

Share
Download
Midas DL451 Operator'S Manual Download Page 17

1

DL451 Modular I/O
Operator Manual

Chapter 1: Introduction

The DL451 Modular I/O is a three-unit (3U) 19” rack unit that provides connection of up 
to 24 audio inputs/outputs.  It has a user-configurable modular

1

 3x8 XLR format that 

can be configured as any combination of analogue mic/line in, analogue out and digital 
in/out (AES/EBU).  Musical instrument digital interface (MIDI) and general purpose 
input/output (GPIO) connections are supplied as standard.  The digital audio interface is 
via dual-redundant AES50 connections.  Five DL451’s are supplied with each XL8 Live 
Performance System.

Your DL451 Modular I/O was conceived by Midas to offer audio professionals 
high-performance audio equipment, designed to provide no-compromise sonic quality 
with a feature set that offers all essential facilities and functions.  It represents the very 
best of British design and engineering combined with contemporary, efficient 
manufacturing methods, and will give you many years of reliable service.

So, to obtain the best results with a minimum of effort, please read this operator 
manual and, finally, enjoy your Midas DL451 Modular I/O!

Warranty and registration

Midas has total confidence in the quality and reliability of this product.  To back this up, 
this product comes with the standard Midas and Klark Teknik three year warranty.

Please take the time to register your product by completing and returning the 
registration card or registering on our website at www.midasconsoles.com.

About this manual

Purpose

This is the operation manual for the DL451 Modular I/O.  It is intended to help get your 
DL451 Modular I/O installed and in operation as quickly as possible by giving you 
unpacking, installation, connection, setting up and operating instructions.  To help 
familiarise you with the DL451 Modular I/O there is a description of the front and rear 
panels, along with easy-to-follow user instructions.

1. It is envisaged that new modules will be developed to service market requirements as they 

continue to evolve.

Summary of Contents for DL451













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands