IFU-001 Rev D June 2014
FDA 510(k) Cleared
CP Relief Wand® Controls
The CP Relief Wand® controls are designed to be simple and easy to operate. Refer to the diagram
below for the location of the controls.
Intensity Control:
The Intensity Control is a thumb dial located on the side for easy access during
treatment. This control provides continuous adjustment and control of the amplitude of the pulsating
electrical current during treatment. This dial is labeled 0-8 and corresponds to the output setting. Set the
Intensity to zero before placing electrodes against the skin and reduce the Intensity to zero after
removing the electrodes from the skin.
On-Off Switch:
This is the main power switch.
Pulse Width Switch:
The Pulse Width Switch selects either 150 microsecond pulse width (low) or 230
microsecond (uS) pulse width (high). Choose the 150 microsecond (uS) setting for lowest power and
maximum comfort during treatment.
Polarity Switch:
The Polarity Switch allows you to choose the polarity of the electrodes for best results.
When using the CP Relief Wand® in certain locations of the body, uncomfortable muscle vibrations may
occur during treatment. By changing the polarity (or rotating the electrode axis) uncomfortable muscle
movements can often be minimized or eliminated.
CP Relief Wand® Battery Information
The battery in your CP Relief Wand® should last for up to 70 hours of operation and give you long
lasting service. We recommend that the battery be replaced with a fresh battery at regular intervals to
reduce the possibility of battery leakage. It is located in the CP-1000 handle and can be accessed by
