background image

NOTICE AND LIMITED WARRANTY

STARTER KIT IMPORTANT NOTICE

The enclosed Starter Kit is a “Prototype” intended for use for 

ENGINEERING DEVELOPMENT OR 

EVALUATION PURPOSES ONLY

 and is not considered by MicroVision, Inc. to be fit for commercial 

use.  As a Prototype, this device may not meet the technical requirements of the European 

Union directive on electromagnetic compatibility.
The user assumes all responsibility and liability for proper and safe handling of the unit.  Also be 

aware that the enclosed unit may not be regulatory compliant or agency certified (such as FCC, 

UL, CE, etc.) with the exception of IEC 60825-1 Laser Safety.  MicroVision assumes no liability for 

application assistance, customer’s product design, or software performance.
Subject to the terms of the MicroVision End User License Agreement found in the downloadable 

User Guide at http://github.com/microvision-inc. MicroVision grants Customer a limited, non-

transferable, non-exclusive license to use MicroVision software and firmware in connection with 

the use of the Prototypes. MicroVision is not selling any MicroVision software or firmware to 

Customer. Customer is not licensed to use MicroVision software or firmware in connection with any 

other application or for any purpose other than evaluation of the Prototype.

Contact Information.

 If you have any questions, please contact MicroVision Customer Service by 

e-mail at [email protected].

Limited Warranty.

 MicroVision warrants that the Prototype will be free of defects in material and 

workmanship for ninety (90) days from the delivery date. MicroVision will at its option, repair or 

replace the Prototype or refund the purchase price paid by Customer for the defective Prototype. 

The repaired or replaced parts or Prototype may include new, reconditioned or re-manufactured 

parts and equipment at MicroVision’s option. Such repair, replacement or refund shall be the 

sole remedy of Customer in the event of MicroVision’s breach of this limited warranty. All costs 

associated with shipment to MicroVision for warranty service, including but not limited to freight, 

Summary of Contents for MV-2400li3













Reviews: