Microtronics myDatalogNANO Ex, User Manual

Page: 5 / 111

Chapter 1 Table of contents
7.4.2 Connecting the GSM antenna 47
7.4.3 Optimum antenna positioning for assembly in a shaft 48
7.4.3.1 Typical influences on the signal quality 48
7.4.3.2 Possibilities for improving the signal quality 49
7.4.3.3 Procedure for determining the optimum position of the antenna 49
7.4.4 Technical details about the universal inputs 49
7.4.4.1 Digital modes (digital, day counter, pulse counter, frequency, PWM) 50
7.4.5 Technical details about energy management 51
7.4.6 Technical details about the device operating time 51
Chapter 8 Initial Start-Up 53
8.1 User information 53
8.2 General principles 53
8.3 Commissioning the system 53
8.4 Testing communication with the device 55
Chapter 9 User interfaces 57
9.1 User interface on the myDatalogNANO Ex 57
9.1.1 Operating elements 57
9.1.1.1 Solenoid switch 57
9.1.1.2 Status LED 58
9.2 User interface on the myDatanet-Server 59
9.2.1 Site configuration 59
9.2.1.1 Site 59
9.2.1.2 Comments 59
9.2.1.3 Measurement channels 59
9.2.1.3.1 Basis 59
9.2.1.3.2 Config 61
9.2.1.3.3 Alarms 66
9.2.1.3.4 Trigger 67
9.2.1.4 Calculated channels 68
9.2.1.4.1 Basis 68
Rev. 01 5