Microtronics myDatalogNANO Ex, User Manual, Page: 45 / 111

Chapter 7 Installation
7.4.1 Connecting the sensors
Important note:
l
Ensure installation is completed correctly.
l
Comply with existing legal and/or operational directives.
l
Improper handling can cause injuries and/or damage to the instruments!
l
Run all data cables so that they do not pose a trip hazard and ensure that cables do
not have any sharp bends.
l
Within the Ex area, the myDatalogNANO Ex must only be operated with the "Cable set
NANO ATEX zone II " connection cable (included in the scope of supply).
l
The myDatalogNANO Ex must not be operated in the field with the lid open.
l
Please note that installation of the device is only permissible if no explosive
atmosphere is currently present.
myDatalogNANO Ex
myDatalogNANO Ex incl. Cable set NANO ATEX zone II and
Clamping tube
1 Connection for sensor cable (15-pin
connector)
2 Cable set NANO ATEX zone II (300252 ,
included in the scope of supply of 300469 )
3 Clamping tube(300256 , simple electrical
equipment included in the scope of delivery
of 300469 )
Rev. 01 45