Chapter 4 General specifications
4.12 Disclaimer
The manufacturer assumes no liability
l
for damages owing to
a change
of this document. The manufacturer reserves the right to change the
contents of this document and this disclaimer at any time and without any notice.
l
for damages to persons or objects resulting from
failure to comply
with applicable
regulations
. For
connection, commissioning and operation of the devices/sensors all available information and higher
local legal regulations (e.g. in Austria ÖVE guidelines) such as applicable Ex regulations as well as
safety requirements and regulations in order to avoid accidents shall be adhered to.
l
for damages to persons or objects resulting from
improper use
. For safety and warranty reasons, all
internal work on the instruments beyond from that involved in normal installation and connection, must
be carried out only by qualified Microtronics personnel or persons or companies authorised by
Microtronics .
l
for damages to persons or objects resulting from the use of instruments in technically
imperfect
condition.
l
for damages to persons or objects resulting from the use of instruments
not in accordance with the
requirements
.
l
for damages to persons or objects resulting from
failure to comply
with
safety information
contained within this instruction manual.
l
for missing or incorrect measurement values or resulting consequential damages due to
improper
installation
.
4.13 Obligation of the operator
WARNING:
In the EEA (European Economic Area), the national implementation of the framework
directive (89/391/EEC) as well as the associated specific directives and from these in
particular, the directive (2009/104/EC) about the minimum safety and health requirements
for use of work equipment by workers at work, each in their respective version are to be
complied with.
The operator must obtain the local operating licence and the associated documents.
In addition, the operator must comply with the local legal requirements for
l
the safety of the personnel (accident prevention measures),
l
the safety of the equipment (protective equipment and maintenance),
l
the product disposal (waste disposal law),
l
the material disposal (waste disposal law),
l
the cleaning (cleaning agents and disposal) and
l
the environmental protection amendments.
Before commissioning, the operator must ensure that the installation and commissioning – provided these
were performed by the operator himself – are in compliance with the local regulations.
Rev. 01
25