MicroTouch Micro Touch Capacitive Controller MT3000, Reference Manual, Page: 11 / 64

Chapter 1 Integrating the MT3000 Controller 11
Figure 2 MT3000 Overall Dimensions
To properly integrate and test the MT3000 controller, you need the
following items:
•
A MicroTouch capacitive touchscreen and MT3000, mated as a
linearized set. The touchscreens are available in a variety of sizes.
•
A method of establishing the serial data communication between the
controller and your system. You can use the standard MicroTouch RS-
232 serial cable (P/N 7310101), or you can build your own cable.
•
A method of supplying power to the controller. There are several options
available including a cable connection to the 0.2 inch power connector
(JP2) or supplying power through the serial cable.
•
A touchscreen driver with a 2–point calibration routine available to the
end user.
Note:
You can use TouchWare, which includes the touchscreen device
driver and utilities software.
+
LED1
JP1
JP
2
JP4
2.435"
[61.85mm]
1.300"
[33.02mm]
0.125"
[3.18mm]
0.125"
[3.18mm]
0.125"
[3.18mm]
0.125"
[3.18mm]