7
USB Installation on the Macintosh
3. Connect one end of the USB cable to your
computer, and connect the other end of the
cable to the scanner’s USB port.
A. Connecting to an Apple iMac
3. Connect power
1. Turn off your computer.
2. Plug the power adapter into the back of the
scanner, and plug the other end into a wall
outlet or power source.
Make sure no other
cable is connected to the scanner except the
power adapter at this point.
This will turn on the scanner. The green light
on the front of the scanner will blink for a few
seconds and then stay on solid.
B. Connecting to a Power Mac G3 with built-in
USB ports
4. Turn on your computer. The system will find
your scanner automatically.
