Bio-1000F User's Manual 15
Step 2: Installing the Software
Important:
Do not remove the yellow stickers from your scanner until you are
told to do so. You must install all software before connecting your scanner.
Always close any open programs and turn off Anti-virus utilities before installing
software.
1. Turn on your computer.
2. Place the Microtek Software
CD/DVD into a drive.
3. Follow the on-screen
instructions to install the driver
and software.
NOTE: If the Microtek Software
Installer screen does not come
up automatically, double-click
the following in succession:
“My Computer”; the CD/DVD-
ROM icon; then cdsetup.exe to
start the installer program.
4. To install the software on the Microtek Software CD/DVD, click each
software program in the order that it appears on the screen to install, and
follow the on-screen instructions.
5. Click EXIT on the Microtek Software Installer screen when all the software
has been installed.
6. Restart your computer.
Drivers & Software Upgrades
After you finish the installation of software, if you found that the installed drivers and software
cannot run your product or your computer system properly later, please go to the Microtek
Download Service site at ww7.microtek.com.tw/service.php to download and install any updates
you may require.
For additional information about Microtek products, please visit our website at www.microtek.com.
