Bio-1000F User's Manual 21
Excising or Observing a Gel
Using the Filter Plate
Came with the scanner package, there is a Filter Plate which can be used
together with the Bio-1000F when making gel excising or observation by using a
blue-LED. Follow the steps below to install the Filter Plate on the scanner and to
perform your scan.
1. Follow the procedures in the section “Positioning a Gel” to place a gel to be
scanned on the scan bed.
2. Follow the procedures (steps 2 and 3) for “Scanning a Gel” to launch the
MiBio Fluo software and to perform a scan of the gel.
3. To install the Filter Plate on the scanner:
A. Lift up the scanner lid.
B. Locate two holes at the top inner side of the scanner lid and then insert
posts at the top of the Filter Plate into the holes, shown as graph.
When done, make sure whether the Filter Plate has been attached with
the scanner tightly.
Posts at the top of
the Filter Plate
Holes at the top
inner side of the
scanner lid
