7
Your First Scan
1.
Launch
ScanWizard Pro
.
•
If this is your first time to launch ScanWizard Pro, you will be
prompted to calibrate your scanner. For more details, refer to the
“Calibrating Your Scanner” section
.
•
Next, you will be prompted to perform color calibration for your
scanner, you can skip this section for now and come back to it
later. Or, if you wish to perform calibration, refer to “ArtixScan
3200XL User Guide” in your Microtek Software CD/DVD.
•
Continuously, you will be prompted to set up color matching for
your scanner, click OK for now to accept the settings. You can
always change the settings at a later time. For more details, refer
to “ArtixScan 3200XL User Guide” in your Microtek Software CD/
DVD.
2.
Position the photo face down on the scanner glass surface
toward the front of the scanner, as detailed in the “Positioning Reflectives” section of this guide.
3.
In the Preview window of ScanWizard Pro, choose
Reflective
from the Scan Material menu.
4.
Click the
Overview
button in the Preview window to see a preliminary scan of the image.
5.
Select the
Scan Frame
tool, and choose the area to be scanned by sizing the marquee around the
targeted area.
6.
Specify your scanning requirements in the Settings window. Choose the desired image type and
resolution, and adjust the scan frame settings if necessary.
7.
Adjust image quality if necessary, using the Advanced Image Correction tools.
8.
Click the
Scan
(or “Batch”) button in the Preview window or on the scanner unit to start scanning.
Window
Expansion button
Preview window
Settings window
Calibration strip
(Keep clear and
unobstructed)
Put the
Black Plate
on
top of the photo to
cover it
TMA 1600-III
Smart-Touch button
(Scan)
Summary of Contents for ArtixScan 3200XL
Page 12: ...12...
