ArtixScan 2500 Installation and Operation Manual 25
English
7 Using the Scanner ICC Profiler Program
1. Introduction
The Scanner ICC Profiler is a scanner calibration and
profiling utility program designed exclusively for use
with Microtek scanners, including the ArtixScan 2500.
The Scanner ICC Profiler lets you calibrate the color
attributes of your scanner and lets you create an ICC
color profile customized and tailored especially for your
scanner.
Why do you need the Scanner ICC Profiler?
Every Microtek Artix scanner includes a factory-set ICC
color profile for use with the scanner controller program
— in this case, ScanWizard Pro. This factory-set profile
delivers high color quality in general. But scanners, like
any high quality imaging device, interpret colors
differently, resulting in subtle variations and differences
in color imaging. In addition, individual scanners of the
same model may also perform differently due to other
factors, such as aging of the scanner lamp or ambient
temperature fluctuations.
With the Scanner ICC Profiler, such color variations and
differences can be minimized or eliminated, as the
program calibrates the scanner and compensates for
subtle color deviations. The customized color profile
resulting from the use of the Scanner ICC Profiler, in
effect, delivers more accurate color and contributes to
overall improved image quality.
To keep the colors in your scanner consistent over time,
it is recommended that you use the Scanner ICC Profiler
regularly. Professional photographers or others who
require extremely precise color may wish to use the
Profiler every time before they use their scanner, but for
most general usage, calibrating twice a month should be
sufficient.
2. Calibration targets
Your Scanner ICC Profiler kit includes two industry-
standard IT8 color targets for calibration.
•
Kodak Q-60R1: This is a reflective target for
calibrating the upper scan bed. Calibrating the upper
scan bed ensures color accuracy when you scan
reflective materials such as photos and prints.
•
Kodak Q-60E1: This is a transparent target for
calibrating the lower scan bed. Calibrating the lower
scan bed ensures color accuracy when you scan
transparent media such as slides and filmstrips.
3. Taking care of the target
The calibration target is very delicate and must be
handled carefully. Make sure you follow these rules in
caring for the target.
•
Gently take the target out of its protective sleeve.
•
Do not touch the target image with your fingers or
with any other object.
•
When not in use, keep the target out of light — even
interior lighting.
•
Always return the target to its protective sleeve
immediately after use.
•
Store the target away from light in a cool, dry place,
since long exposure to heat and light can change the
colors on the target.
Summary of Contents for ArtixScan 2500
Page 1: ......
