Microtek ArtixScan 2500, User Manual

Page: 13 / 40

ArtixScan 2500 Installation and Operation Manual 9
English
3. Termination
If you are connecting the scanner in a daisy chain to
other SCSI devices (such as a CD-ROM drive), take note
of the following:
A. If the scanner is the last device on the SCSI chain, set
the internal terminator switch on the back of the
scanner to the “ON” position. There is no need to
install an external terminator on any of the other
SCSI devices on the chain.
ON OFF
B. If the scanner is not the last device on the SCSI
chain:
• Make sure the internal terminator switch located
at the back of the scanner is set to the “OFF”
position.
• Make sure the last device on the SCSI chain is
terminated.
C. Installing the software
Install all the software on your ScanWizard Pro™
CD-ROM, which contains the ScanWizard Pro scanning
software, ICC profiles and the Microtek Scanner
Profiler™ software for calibrating the ArtixScan 2500
(see page 25).
To do this, insert the ScanWizard Pro CD-ROM into
your CD-ROM drive. When the CD-ROM icon appears
on your Macintosh desktop, open the software folders
individually, then double-click the Installer icon on each
folder to install the respective programs one at a time.