Microtek ArtixScan 2500, User Manual

Page: 15 / 40

ArtixScan 2500 Installation and Operation Manual 11
English
3. Installing the software
Install all the software on your ScanWizard Pro CD-
ROM, which contains the ScanWizard Pro scanning
software, ICC profiles and the Microtek Scanner
Profiler™ software for calibrating the ArtixScan 2500
(see page 25).
To do this, insert the ScanWizard Pro CD-ROM into
your CD-ROM drive; the Scanner Software installer
should come up automatically.
Note: If the Scanner Software is not automatically
displayed, click Start, select Run and type d:\cdsetup
(where d: is your CD-ROM drive).
Click on the “Install” option on each software program
in the order that it appears on your screen to install the
software.
After all the software has been installed, shut down your
computer.
4. Connecting the scanner
1. Turn off your PC.
2. Plug the 25-pin end of the SCSI cable into the
Adaptec card at the back of the computer. Then plug
the 50-pin end of the SCSI cable into the back of the
scanner.
Note: See the next section for details on termination.
3. Plug the power cord into the back of the scanner and
plug the other end of the power cord into a power
source or wall outlet.
4. Press the scanner’s power button on the front panel to
turn the power on, then wait for the Ready indicator
lights also on the front panel of the scanner to stop
blinking and to stay on solid.
5. Turn your PC back on. When Windows starts up, it
will automatically detect the scanner.