MT-FP4060-UV Operating Manual
5
1.1.2 Machine Use Notices
Please remove the print head holder from the left and right side of the printer
body(eg: below photo)
Turn on the machine and use machine every day, which is suggested. If you don’t have printing job someday,
please just make a nozzle check pattern and print some pictures.
If the machine will not be used for over 30 days, the print heads are suggested to disassemble and make a cleaning,
and then keep well
.
Before printing, please adjust the print gap between print head and print object to be
1-2mm
, and then start
printing. Be cautious, if the print head is lower than print object surface, the print head will get scratched or
clashed.
Reflective materials, like stainless steel, mirror, etc are not allowed to print, Because their reflective surface will
reflect UV light onto print head nozzles and get nozzles clogged by UV ink.
Holder for platform
（
to remove them from the left and right side of the printer body before using
）
Please put the red fixed plated removed before using the machine