MT-FP4060-UV Operating Manual
13
Wiper blade
Normally the seal rubber of cap top will properly seals with print head nozzles surface, after the carriage assembly is
back to home position and locked. The seal between cap top and print head is to ensure the smooth ink suction of all
nozzles and is also important for printing.
。
Ink absorption mat
1.2.6 X-axis and Y-axis Servo Control System
Servo motors can locate precise positioning by sending and receiving electric impulse and intelligent stepping
calculation, so that carriage assembly and print bridge can move synergically and synchronously together, which
facilitates to get higher print quality.
If the wiper gets too much
stained, use some cleaning
liquid to clean it
Seal rubber of cap top
Cushioning material