Microtec CUT4060E, Operating Manual, Page: 28 / 36

micro
Tec
   
28
7.6 Film (Thin Material) Clamping Fixture
The film clamping fixture is a clamping system for film and foil materials or flat and thin
specimens. To insert the specimen, the three threaded pins are loosened, and the
movable jaw against the two compression springs, the setting of which is made by the
two threaded pins, moved laterally. The specimen is held by the force of the springs,
but can be repositioned. By screwing in the threaded pins, the specimen is securely
clamped between the jaws of the film clamping fixture.
7.7 Universal Cassette Clamping Fixture
The universal cassette clamping fixture is a quick change specimen system, and is
used for the clamping of cassettes.
Inserting and removing the cassette
Pull clamping lever in the direction of the arrow.
Important!
Optimal clamping is only achieved if the bearing faces are
clean of any paraffin wax residues.
Thread pin