DOC-iID-POCKETwork-02E.docx
Site 9 of 28
The actions being executed by the POCKET are signalled on the display of
the POCKET. The following table shows the possible actions with the
corresponding indications on the display according to the factory setting:
Action
Indications on the display
Press the button (1) to turn
on the POCKET
microsensys-logo
Mode (DOC or SPC)
Frequency (HF or UHF)
Serial number
Version number of the firmware
Releasing the button (1) of
the POCKET
Display status bar
Bluetooth connection
should be established
Bluetooth icon without lines
Bluetooth connection is
established
Bluetooth icon with lines
Executing a host
command without TAG
communication
No further indication
Executing a host
command with tag
communication
Status display "Success" or "Fail",
In addition, the antenna symbol indicates the
status of the antenna.
Battery strength
The battery icon shows the current charge
status
Charging via USB
The battery icon continues to be visible in the
status bar
Separating the Bluetooth
connection through the
host device
Display "Bluetooth disconnected"
Press the button (1) to turn
off the POCKET
Display "device off"
