Microsensor MDM4901FL, Operation Manual

Page: 6 / 12

Fig. 4
b) Installation notes:
1) To prevent the installation position from affecting zero output
signal, the transmitter can be installed horizontally on the tube
and the plug could be installed vertically up.
2) Pay attention to whether the measured medium is consistent with
the transmitter structure material.
3) Pay attention to the measuring medium is compatible with the
construction material or not.Notice the positive(
“ ＋ ”
) and
negative (
“－”
) mark on the pressure ports while connecting the
actual pressure direction corrrectly.
4) The transmitter should be installed in the low temperature
gradient and low temperature fluctuation place, to prevent
vibration and shock.