Gigabit Ethernet Switch – Hardware Manual
Page 9 of 36
_______________________________________________________________
©2016_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
DESCRIPTION OF HARDWARE
1000BASE-T PORTS
The switch contains ten 1000BASE-T RJ-45 ports. All RJ-45
ports support automatic MDI/MDI-X operation, auto-negotiation
and IEEE 802.3x auto-negotiation of flow control, so the
optimum data rate and transmission is selected automatically.
SFP TRANSCEIVER
SLOTS
MS453526M supports the Small Form Factor Pluggable (SFP)
transceiver slots are port 9 and 10. In the default configuration,
if an SFP transceiver (purchased separately) is installed in a slot
and has a valid link on the port, the associated RJ-45 port is
disabled.
PORT AND SYSTEM
STATUS LEDS
The MS453526M switch includes a display panel for system and
port indications that simplify installation and network
troubleshooting. The LEDs, which are located on left hand side
of the front panel for easy viewing. Details are shown below and
described in the following tables.
Mode Status LEDs
LED
Condition
Status
Link/ACT/Speed Green
Lit Green indicates all LED of each port are
in Link/ACT/Speed mode.
System Status LED
SYSTEM LED
Condition
Status
Power
Green
OFF
Lit when power is coming up
