Gigabit Ethernet Switch – Hardware Manual
Page 18 of 36
_______________________________________________________________
©2016_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Serial Port (RJ-45) Pin-Out
WIRING MAP FOR SERIAL CABLE
Serial Cable Wiring
Switch’s 8-Pin Serial
Port
Null Modem
PC’s 9-Pin DTE Port
6 RXD (receive data)
-----------------
3 TXD (transmit data)
3 TXD (transmit data)
-----------------
2 RXD (receive data)
5 SGND (Signal ground)
-------------------
5 SGND (Signal ground)
NOTE:
No other pins are used.
Plug in the Console Port
The serial port’s configuration requirements are
as follows:
◆
Default Baud rate—115,200 bps
◆
Character Size—8 Characters
◆
Parity—None
◆
Stop bit—One
◆
Data bits—8
◆
Flow control—none
2 TXD
5 GND
3 RXD
