Gigabit Ethernet Switch – Hardware Manual
Page 12 of 36
_______________________________________________________________
©2016_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
RJ-45 Connections
SFP Transceiver
EQUIPMENT
CHECKLIST
After unpacking this switch, please check the contents to be
sure you have received all the components. Then, before
beginning the installation, be sure you have all other necessary
installation equipment.
PACKAGE
CONTENTS
MS453526M 10 port GbE switch
Four adhesive rubber feet
Mounting accessory (for 19” rack shelf, optional)
User’s manual CD
AC power cord
RJ-45 console cable
NOTE:
Please notify your sales representative immediately if
any of the aforementioned items is missing or damaged.
WARNING:
The mini-GBICs are Class 1 laser devices. Avoid
direct eye exposure to the beam coming from the transmit port.
MOUNTING
The switch can be mounted in a standard 19-inch equipment
rack or on a desktop or shelf. Mounting instructions for each
type of site as follow.
RACK MOUNTING
Before rack mounting the switch, please pay attention to the
following factors:
Temperature: Since the temperature within a rack assembly
may be higher than the ambient room temperature, check
that the rack-environment temperature is within the
specified operating temperature range (0 to 45 °C).
Mechanical Loading: Do not place any equipment on top of
a rack-mounted unit.
Circuit overloading: Be sure that the supply circuit to the
rack assembly is not overloaded.
Grounding: Rack-mounted equipment should be properly
