Gigabit Ethernet Switch – Hardware Manual
Page 32 of 36
_______________________________________________________________
©2016_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
SPECIFICATIONS
PHYSICAL CHARACTERISTICS
PORTS
8 10/100/1000Mbps UTP
2 GbE Combo Ports TP/ (100/1000M) SFP
NETWORK
INTERFACE
Ports 1-8: RJ-45 connector, auto MDI/X
10BASE-T: RJ-45 (100-ohm, UTP cable; Category 3 or
better)
100BASE-TX: RJ-45 (100-ohm, UTP cable; Category 5 or
better)
1000BASE-T: RJ-45 (100-ohm, UTP or STP cable;
Category 5, 5e or 6)
*Maximum Cable Length - 100 m (328 ft)
Ports 9-10: RJ45/SFP Combo ports
BUFFER
ARCHITECTURE
512KB on-chip frame buffer
AGGREGATE
BANDWIDTH
20 Gbps for MS453526M
SWITCHING
DATABASE
8K MAC address entries
LEDS
System: POWER
TP Port: status (LINK/ACT), 10/100/1000M
SFP Port: status (LINK/ACT/SPD), 100/1000M
SIZE
44(H) x 220(W) x 242(D) mm
TEMPERATURE
Operating: 0°C to 45°C
HUMIDITY
Operating: 10% to 90% (non-condensing)
POWER INPUT
100~240VAC, 50~60Hz
POWER Budget
8 Watts maximum
SWITCH FEATURES
FORWARDING MODE
Store-and-forward
THROUGHPUT
14.880 Mpps
FLOW CONTROL
Full Duplex: IEEE 802.3x
Half Duplex: Back pressure
