ZL70550 Application Development Kit (ADK) User’s Guide
Revisio n 1
6
Figure 1 – Example Remote Unit
2.3
Jumper Configuration
provides a description and the default setting for each jumper on each board.
Table 1 –
Jumper Configuration
Jumper Description
Default
Setting
ADP200
JP1
Allows the user to select power from either Vsup 1 (jumper on pins 2 and 3)
or a CR2032 coin-cell battery (jumper on pins 1 and 2) for the BASE550 or
REMOTE550 board.
Jumper on
pins 2 and 3
(Vsup 1)
JP2
When installed, provides power to the BASE550 or REMOTE550 board on
Vsup 1. Also allows the user to measure the current on Vsup 1 supply by
removing the jumper and placing a current meter across the jumper.
On
BASE550 and REMOTE550
JP1
When installed, provides power to the ZL70550 device. Allows the user to
measure the current to the ZL70550 device by removing the jumper and
placing a current meter across the jumper.
On
