Microsemi SyncSystem 4380A, Operation And Maintenance Manual

Page: 86 / 90

DOC 4380A
4380A O & M Manual
78
098-00723-000
– Jul 2017 Revision 4.0
SyncSystem 4380A O&M Manual
- Intervals Default – 1 PPS, Valid PPS values are 10 M, 1 M, 100 K, 10 K, 1 K, 100,
10,& 1
- Pulse Width Default - ~100 µs +/-10 µs. Pulse width is variable in integer counts of 100
MHz clock period.
- Jitter <80 ps
- Skew <+/-75ps
A.11 RS-422 PPS Module (4376A)
Characteristic Description
Number of outputs Four
Output connectors DE-15(F)
Impedance
100 Ω Differential
Pins PPS1 (+ 1 & - 9), PPS2 (+ 3 & - 11), PPS3 (+ 5 & - 13), PPS4 (+7 & - 15)
Grounds Pins 2, 4, 6, 8, 10, 12, 14
- Intervals Default – 1 PPS, Valid PPS values are 10 M, 1 M, 100 K, 10 K, 1 K, 100,
10,& 1
- Levels > 2V and < 2V into 100 Ω, 1 <= Vcm <= 3.3 V
- Pulse Width Default - ~100 µs ±1 µs. Pulse width is variable in integer counts of 100 MHz
clock period.
- Rise/Fall Time < 10ns
- Jitter <120 ps
- Skew <+/500ps
A.12 10 MHz Module (4395B-10)
This module provides four 10 MHz outputs. The module also monitors each output for levels below
approximately 10 dBm, after which an alarm is raised.
Characteristic Description
Number of outputs Four
Output connectors BNC(F)
Impedance
50 Ω
Amplitude +13dBm +/- 2dBm
Signal Sine Wave
Harmonics < -40dBc
Phase Noise 1 Hz -110 dBc/Hz
10 Hz -132 dBc/Hz
100 Hz -145 dBc/Hz
1 KHz -150 dBc/Hz
10 KHz -155 dBc/Hz
100 KHz -155 dBc/Hz
1 MHz -155 dBc/Hz
A.13 5 MHz Module (4395B-5)
This module provides four 5 MHz outputs. The module also monitors each output for levels below
approximately 10 dBm, after which an alarm is raised.
Characteristic Description
Number of outputs Four
Output connectors BNC(F)
Impedance
50 Ω
Amplitude +13 dBm +/- 2 dBm
Signal Sine Wave