DOC 4380A
4380A O & M Manual
13
098-00723-000
– Jul 2017 Revision 4.0
SyncSystem 4380A O&M Manual
[OK] 2015-08-05T15:42:42Z
B.
Set the latitude for the antenna using the
latitude
command.
4380A>latitude 38.46627893094
or
4380A>latitude 38.46627893094N
NOTICE
Note:
Default is [N]orth. If you are in the southern hemisphere make sure there is an [S]outh
after the latitude or a (-) before the latitude.
4380A>latitude -38.46627893094
or
4380A>latitude 38.46627893094S
C.
Set the longitude for the antenna using the
longitude
command.
4380A>longitude 77.44086542274004
or
4380A>longitude 77.44086542274004E
NOTICE
Note:
Default is [E]ast. If you are in the Western hemisphere make sure there is an [W]est after
the latitude or a (-) before the latitude.
4380A>longitude -77.44086542274004
or
4380A>longitude 77.44086542274004W
D.
Set the altitude for the antenna using the
“altitude”
command. Default value is ellipsoid height
meters. Users can specify the height in feet by using
F
after the value.
4380A>altitude 51.573999999999998
or
4380A>altitude 169.206037003 F
E.
Verify the current settings are correct using the
settings gps
command or narrow it down further
with the
settings
gps:positioning:manual_position
and
settings gps:datum
commands.
4380A>settings gps:positioning:manual_position
[altitude] 5.157399999901
[latitude] 3.846627893001
[longitude] -7.744086542201
4380A>settings gps:datum
wgs84
[OK] 2015-08-05T15:43:31Z
The operator also has the option of setting the manual mode and entering all three parameters on the same
command line using the
fix_position
(
current | lat, lon, alt)
command.
4380A> fix_position 38.46627893094 -77.44086542274004 51.573999999999998
Summary of Contents for SyncSystem 4380A
Page 2: ......
