Microsemi PDS-104G, User Manual, Page: 6 / 48

PDS-104G PoE Switch
Power Over Ethernet PowerView Pro User Guide
Copyright © 2016 Microsemi Page 6 of 48
Rev. 1.0 CPG
– PoE BU
One Enterprise Aliso Viejo, CA 92656 USA
1.3 Organization
This guide is divided into the following sections:

Section 1 : Defines the concepts used, conventions used and associated documentation

Section 2 : Outdoor Power View Pro features and capabilities

Section 3 : Complete system installation procedure

Section 4 : Outdoor PowerView Pro Web interface detailed description

Section 5 : SNMP monitoring and configuration

Section 6 : Syslog message report

Section 7 : Upload/download unit configuration over TFTP

Section 8 : Software update

Section 9 : Recovering from unknown username, password

Section 10 : Troubleshooting
1.4 Conventions
The various conventions used in defining commands and examples are given in the following table.
CONVENTION DEFINITION
bold Keywords and commands
italics Represents a Web interface item
screen Displayed Information
Courier text Information to be entered
Notes Helpful information
1.5 Related Documentation
For additional information, refer to the following documentation:

Product user installation guide

Technical Note 132: Using RFC3621 PoE MIB with Microsemi Unit.

RFC3621 SNMP MIB, and private MIB

Creating Certificate for PDS-104G Secured Web Server
1.6 Abbreviations
Table
‎
1-1: List of Abbreviations
IPv4 32-bit long IP address
IPv6 128-bit long IP address
DHCPv4 Dynamic IPv4 Host Configuration Protocol
DHCPv6 Dynamic IPv6 Host Configuration Protocol
PoE Power over Ethernet
NTP Network Time Protocol
DES Data Encryption Standard
MD5 Message Digest algorithm
SHA Message Digest algorithm
MDI Media Dependent Interface
SSL
Secure Sockets Layer
TLS Transport Layer Security
MIB Management Information Base
PD Powered Device
SNMP Simple Network Management Protocol
TFTP Trivial File Transfer Protocol