IGLOO2 FPGA Adaptive FIR Filter Demo Guide
Revision 2
13
Figure 7
shows the board setup for running the Adaptive FIR Filter Demo on the IGLOO2 Evaluation
Kit.
5. Ensure that the USB to UART bridge drivers are automatically detected. This can be verified in
the Device Manager of the Host PC. The FTDI USB to UART converter enumerates four COM
ports. For USB 2.0, note down the USB Serial Converter D COM port number to use it in the
IGL2_Adaptive_FIR_Filter.exe.
Figure 7 •
IGLOO2 FPGA Evaluation Kit Adaptive FIR Filter Demo Setup
Superseded
