IGLOO2 FPGA Adaptive FIR Filter Demo Guide
Revision 2
15
4. In the
New Project
window, type the project name as
IGL2_Adaptive_FIR_Filter
.
5. Click
Browse
and navigate to the location where you want to save the project.
6. Select
Single device
as the
Programming mode
.
7. Click
OK
to save the project.
Setting Up the Device
The following steps describe how to configure the device:
1. Click
Configure Device
on the FlashPro GUI.
2. Click
Browse
and navigate to the location where the
IGL2_Adaptive_FIR_Filter.stp
file is
located and select the file. The default location is:
<download_folder>/IGLOO2_Adaptive_FIR_Filter\Programmingfile\IGL2_Adaptive_FIR_Filter.st
p
.
3. Click
Open
. The required programming file is selected and is ready to be programmed in the
device.
Figure 9 •
FlashPro - New Project
Superseded
