Microscan Quadrus Verifier, User Manual

Page: 385 / 470

Quadrus Verifier User’s Manual
14-17
Utilities
Defaulting/Saving/Resetting
Understanding and controlling your reader’s active, saved, and default settings is critical to
the operation of your reader.
Software Reset/Save/Recall Commands
Resets
Resets ( <A> commands) affect only the current settings (active memory) and are not
saved for power-on.
Saved for Power-On
Power-on parameters ( <Z> commands) are saved to NOVRAM and recalled and loaded
into current parameters when power is cycled or the <Arp> command is issued.
Defaults
Defaults are Microscan firmware settings or saved customer settings that can be recalled,
either by software or hardware reset.
Function
Serial
Cmd
ESP (first, right click in
any menu tree)
a
a. When you right click in a menu tree and select Default Current Menu Settings or Default All ESP
Settings , it is important to note that only ESP settings are defaulted. To save these defaults to the
reader itself, you need to follow up with a <Z> or Save to Reader , Send and Save command.
EZ Button
Re
set
s
(n
ot sav
ed
for po
we
r-
on)
Reset <A>
Save to Reader,
Send No Save
No
Reset and recall Microscan
defaults
<Ard> No No
Reset and recall power-on
parameters
<Arp> No No
Reset and recall customer
default parameters
<Arc> No No
Sa
ved for
Power-on
Save current settings for
power-on
<Z>
Save to Reader,
Send and Save
No
Save current settings as
customer default parameters
<Zc>
Save to Reader,
Send and Save Customer
Defaults
b
b. Only available in ESP if enabled under the Options pulldown menu.
No
Recall Microscan default
parameters and save for
power-on
<Zrd> No No
Recall customer default
parameters and save for
power-on
<Zrc> No
Press and hold
while powering on
Reader