LVS-9580 Operating Instructions - English
LVS-9580 Operating Instructions - English
Page 9 of 17
Turn on the LVS-9580 Camera
1. C
lick the “Setup” tab and select “9580” in the “Camera” section (see below).
Note:
If you are using only an LVS-9580 (with no other LVS-95XX barcode
verifier, such as an LVS-9510), then
“9580” will be the only camera listed in the
“Camera” section. If you are using an LVS-9580 with an LVS-9510 (1.3 mp or 5.5
mp cameras) or LVS-9505 (1.3 mp or 2.1 mp cameras), then all system cameras
appear i
n the “Camera” section. Select “9580.”
2.
Select “Auto-sector” in the “Grading mode” section (see screenshot above). This allows the
LVS-95XX software to locate a barcode within the field of view and automatically draw a
sector around the barcode.
3. Next, you need to calibrate the LVS-9580 (if using the LVS-9580 for the first time). See the
next section for calibration steps.
Additional camera
9580 camera
Select the “Auto-
sector” option
