Microscan LVS-9580, Operating Instructions Manual

Page: 4 / 17

LVS-9580 Operating Instructions - English
LVS-9580 Operating Instructions - English Page 4 of 17
Important Information

The LVS-9580 arrives to your site packaged in a specially designed shipping carton. DO NOT
discard this shipping carton in case you must ship or store the system for any reason. Failure
to use this carton when returning your product to Microscan will void warranty.

This guide is intended to help you understand the features and functionality of the LVS-9580.
Be sure to reference the following additional resources:
o
Refer to the
“LVS-95XX Series Software Installation Guide” for steps on installing the
LVS-95XX software.
A hard copy version of the “LVS-95XX Series Software Installation
Guide” is packaged with your system and an electronic version is located on the
installation media.
o
Refer to the
“LVS-95XX Series Barcode Quality Station Operations Manual” for
comprehensive steps on operating the LVS-95XX software. This manual is located on the
installation media packaged with your system.

If you have any questions or concerns about the performance of the LVS-9580, please call
your local Microscan Distributor or Microscan technical support:
Microscan Technical Support:
+1-425-203-4841 | +1-800-762-1149 |
helpdesk@microscan.com
Safety Instructions
The LVS-9580 has been carefully designed to provide years of safe, reliable performance.
However, as with all electrical equipment, there are some basic precautions you should follow to
avoid personal injury or damage to the system:

Before using the system, carefully read all the installation and operating instructions.

Observe all warning instruction labels on the system.

Never insert anything into the openings of the system.

Do not use the system near water or spill liquid into it.

All components used to create your system are CE approved. All circuits were designed to
incorporate maximum safety. However, any equipment using electrical voltages may cause
personal injury if improperly handled.

Do not attempt to work on the system with the USB cable connected.

To avoid damaging the system, unplug the USB cable before cleaning.

If the system ever needs repair, consult Microscan or your Microscan Distributor.