3
Changing the user time
The user time can be altered from 2 hours (standard) to
12 hours. This is done by holding in the function button at
the end of the sensor (see illustration below) for 10 seconds.
The sensor will acknowledge this with two short sound signals.
If it is wished to reset Mkomfy to 2 hours operating time,
hold the cut-off button in for 10 seconds, and the sensor will
acknowledge this with 1 sound signal. The time will also reset
automatically to 2 hours following use (cold cooker elements).
Battery change
Battery change is normally only necessary after approx. 6 years’
use. The sensor will warn about battery change when necessary.
This will be done by 2 short sound signals every 5 minutes.
Maintenance
The temperature sensor must be cleaned regularly
with a cloth dampened with slightly soapy water.
1.
Pull the sensor out of its bracket
without twisting it.
NB: Do not loosen the set screw!
2.
Flip off the cover from the rear
edge nearest the bracket and
insert new AAA batteries.
Replace the cover
3.
Replace the sensor in its bracket
in the correct locking position
and press it fully into place.
Function button
Set screw
Temperature sensor
User information
