11
Alarm Signal:
One (1) alarm
every 30 seconds.
Indicates:
5 minutes left of the 2 hours timer function
before switching off the kitchen stove.
Action:
Push button for another 30 minutes in operation.
Alarm Signal:
Two (2) alarms
every five minutes.
Indicates:
Battery change is needed.
Action:
Remove the Sensor from the bracket without twisting it.
Note!
Do not loosen the screw!
Remove the lid, and replace the batteries (2xAAA).
Mount the sensor back into the mounting bracket in
correct lock position.
DIFFERENT ALARM SITUATIONS WHEN USING MKOMFY
Alarm Signal:
Three (3) alarms
every 5 second lasting for 40 seconds,
and LED flashing.
Indicates:
Over heating.
Action:
Push button and perform an action to lower the
temperature within 5 minutes.
NO RESPONSE
Indicates:
No Power.
Action:
Push button.
Note!
If it doesn’t work, replace the batteries as described
above.
Note! If none of these steps are helping, try to turn off the main fuse for the stove in the
fuse box, and then turn the fuse on again.
You will then get power supplied to the stove for the next 24 hours. Then call your electrician for
further troubleshooting.
NOTE that the security functions are not activated in this period.
Phone: +47 464 88 100 (Mon. – Fri.: 08:00 – 15:00)
Alarmsignal:
Ett (1) lydsignal
hvert 30. sekund.
Årsak:
5 minutter funksjonstid gjenstår
av 2-timers ”Timer-funksjon”.
Tiltak:
Trykk på funksjonsknappen for nye 30 minutter
funksjonstid.
Alarmsignal:
To (2) lydsignal
hvert femte minutt.
Årsak:
Batteribytte er nødvendig.
Tiltak:
Trekk sensoren ut av festet uten å vri rundt på den.
NB: Settskrue skal ikke løsnes!
Ta av lokket, og sett i 2 nye batterier (2xAAA).
Sett sensoren tilbake i festet i riktig låseposisjon.
FORSKJELLIGE ALARMSIGNAL VED BRUK AV MKOMFY
Alarmsignal:
Tre (3) lydsignal
hvert 5. sekund som vil vedvare i
40 sekunder og LED blinker.
Årsak:
Overoppheting.
Tiltak:
Trykk på funksjonsknappen og gjør tiltak ved for eks. å
skru ned varmen innen 5 minutter.
INGEN RESPONS
Årsak:
Ikke strøm på komfyren.
Tiltak:
Trykk på funksjonsknappen.
OBS!
Dersom dette ikke virker, sett inn nye batterier
i sensoren som beskrevet ovenfor.
OBS! Hvis ingen av tiltakene ovenfor hjelper, slå ut og inn sikringene
for komfyrkursen. Du vil nå ha strøm for 24 timer.
Bruk denne tiden til å tilkalle elektriker for å finne årsaken til problemet.
OBS! I denne 24-timersperioden er IKKE sikkerhetsfunksjonene aktive.
LED
Function button
LED
Button
Tlf: 464 88 100 (Man. – Fre.: 08:00 – 15:00)
47.13
47.13
Endring av Timer
Hold funksjonsknapp i 10 sek for å få
12 timer drift
på platetopp (to lydsignal).
Hold i 10 sek en gang til for å gå tilbake til
2 timer drift
(ett lydsignal).
Change timer function
Push button for 10 seconds to get
12 hour operating time
(two beeps).
Push button for 10 seconds again to get
2 hour operating time
(one beep).
OBS!
Påse at du har
nye batterier
tilgjengelig
Note!
Ensure that new
batteries are available.
Alarms signals with use of Mkomfy
Alarm signal:
One (1) sound signal
every 15 seconds.
Cause:
In the last 5 minutes of the timer function.
Action:
Press the button for an extra 30 minutes of function time.
Alarm signal:
One (1) sound signal
every second for 5 seconds.
Cause:
Anti-tamper function detects that the sensor has been
removed from the bracket.
Action:
Replace the sensor in the bracket and press the button.
Alarm signal:
Two (2) sound signals
every five minutes.
Cause:
Battery change necessary.
Action:
Pull the sensor from the bracket. Flip off the cover and insert
new AAA batteries. See more in User instructions page 3.
Alarm signal:
Three (3) sound signals
every 5 seconds, lasting for max.
40 seconds, and the LED flashes.
Cause:
Overheating.
Action:
Press the button and take action, e.g. by turning down the
heat, within 5 minutes.
NO RESPONSE
Cause:
No power to the cooker.
Action:
Press the button. NB If this does not work, insert new
batteries in the sensor as described above.
NB If none of these actions work, turn the fuses
on the cooker circuit off and on. You will now
have power for 12 hours. Use this time to call an
electrician to find the source of the problem.
This is an emergency mode. NOTE that the safety
function is NOT active in this period.
The relay beeps once every 30 seconds for the first
5 minutes after activating the emergency mode.
User information
