MicroPower SC17-32 24 V, Manual

Page: 8 / 206

Model Fuse type Bolt size Current rating Voltage rating
Rated tightening
torque
SC6-14 24 V MTA MidiVal 50 A M5 50 A 32 V 4.5 Nm ±20%
SC17-32 24 V
160LET BS88
High speed
M6 160 A 150 V 7.0 Nm ±10%
SC17-32 48 V
100LET BS88
High speed
M6 100 A 150 V 7.0 Nm ±10%
Alarms
If the battery charger’s built-in self-testing function
detects a fault, this is indicated via the LED’s,
refer to LED indication. Make a note of the
information and contact service personnel.
Checks
1. Check the cables and connectors for
damages.
2. Check that the battery is free from defects, in
good condition and is the correct type for the
battery charger.
3. Check that the battery is properly connected
and that the battery fuse, if any, is not broken.
4. Check that the mains voltage is right and that
there are no blown fuses.
Technical data
Operational ambient temperature: –5 to 40 °C (23
to 104 °F)
(1)
Storage temperature: –25 to 60 °C (–13 to
140 °F)
Mains voltage: See data label
(2)
Output voltage: See data label
(2)
Battery types: See data label
(2)
Efficiency: >90% at full load
Ingress protection: IP20
Approvals: CE and/or UL. See data label
(2)
1) Measured at the charger air inlet.
2) Located on the battery charger.
Recycling
The battery charger is recycled as metal and
electronics scrap. Local regulations apply and
must be followed.
Contact information
Micropower Sweden AB
Idavägen 1, SE-352 46 Växjö, Sweden
Phone: +46 (0)470-727400
e-mail:
support@micropower.se
www.micropower-group.com
ENGLISH
8