MicroPower SC17-32 24 V, Manual

Page: 7 / 206

Green
Green double
flashing
Green On Red and green Yellow flashing Red On Red flashing
Charging in pro-
gress. One LED
at a time lights
up and moves
upwards. Equalize / bal-
ance charging
in progress. Charging com-
pleted. An alarm is
active, but
charging is still
in progress. Charging re-
stricted. A bat-
tery is connect-
ed but charging
is restricted
(due to e.g.
Stop input). An alarm is
active. Software mal-
function.
GET Ready – NFC
The unit has Near Field Communication (NFC)
and can communicate with compatible iOS-/
Android devices.
1. Activate NFC on the current
iOS-/Android device.
2. Put the iOS-/Android device on
the units NFC symbol.
For further information, refer to GET APP
information on Micropower Support Center.
Maintenance and
troubleshooting
The checks below are recommended to be car-
ried out during troubleshooting and maintenance.
WARNING
High voltage!
Only qualified personnel should install, use,
maintain and service this product.
Disconnect the battery and power supply before
maintenance, servicing or dismantling.
WARNING
High voltage!
If there is evidence of damage to the battery
charger, cables or connectors, switch off the
mains power. Do not touch damaged parts.
Do not touch uninsulated battery terminals,
connectors, or other live electrical parts.
Contact service personnel.
Safety shut-off
Charging is terminated if:
• The recharged number of ampere hours
exceeds the preset value.
• The charging time for any of the charging
phases exceeds the preset value.
•
Voltage and current exceed the maximum set
value.
• The battery is disconnected without the
battery charger being stopped.
Charging is temporarily stopped or reduced when:
• The battery charger temperature exceeds
charger limits.
Fuse protection
The charger has a fuse, see Fig. 3 Connections and components pos 3.
ENGLISH
7