MicroPower 2A1A901, User Manual

Page: 5 / 26

WARNING, explosive gases .
Lead-acid batteries generate
explosive gases during charging.
No open flame . Fire, open ignition
source and smoking are prohibited
near battery.
Introduction
This document contains use and maintenance
instructions for the intended battery charger.
This document is of relevance for the one who
uses the battery charger for its purpose; charge
batteries. It includes connecting the charger to the
battery, handling the charging process, and
managing basic settings.
Target groups:
•
Installers
•
Operators
•
Maintenance personnel and technicians
Description
Champ Pro is a compact and waterproof battery
charger, delivered preprogrammed, for charging
the following lead-acid batteries:
•
Standard (STD)/flooded batteries: sealed
batteries with a liquid electrolyte (recognisable
by the vent plugs) and lowmaintenance/
maintenance-free flooded batteries.
• Absorbent Glass Mat (AGM) batteries: sealed
batteries (VRLA) with immobilised electrolyte
(Glass mat).
•
GEL batteries: sealed batteries (VRLA) with
immobilised electrolyte (gel).
• Traction batteries: vented, closed Pb-flooded
batteries with liquid electrolyte. The most
common are PzS and GiS.
The battery types' different charging curves are
selectable via the buttons on the charger's front.
The charger also has a power supply mode,
giving a steady output of preset voltage level.
The built-in microprocessor controls current and
voltage during the charging process. The
charger's LEDs indicate the status of the charging
process. The charging time and temperature of
the charger are monitored throughout the
charging process. The charging is limited in the
event of defect cells or insufficient cooling etc.
Receiving
On receipt, visually inspect the product for any
physical damage. If necessary, contact the
transport company.
Check the delivered parts against the delivery
note. Contact your supplier if something is
missing, see
Contact information .
Installation
Mechanical installation
The battery charger:
•
is intended for installation in vehicles and
other applications,
• is suitable for indoor and outdoor use,
• is required to be mounted against a solid
surface,
• should, when fitted on a wall or in a vehicle,
be vertically mounted for optimal cooling.
CAUTION
• Avoid high ambient temperature, i.e. not near
turbochargers, exhaust manifolds, etc.
•
The battery charger becomes warm during
operation.
• Position the charger so that the air supply is
not obstructed.
• The battery charger should always be
securely fastened. Use screws and lock
washers when attaching the charger (the
installation must withstand shocks and
vibrations in e.g. a vehicle).
Electrical installation
WARNING
High voltage!
Incorrect connection of battery cables can cause
personal injuries and damage to the battery,
battery charger and cables.
Make sure the connections are correct.
ENGLISH
5