8
6. Power ON/OFF
6.1 Battery and Charging
When turning on the meter for the first time after unpacking, please
connect the adapter for power supply and turn off the transportation
mode. You do not need to repeat this operation for subsequent reboot.
Ensure the meter is fully charged before using for the first time.
Approximately 3.5 hours to fully charge.
When the screen displays E001, the adapter should be connected
immediately for charging. If the battery charge display shows only one bar,
it is recommended that the user connect the power adapter to charge as
soon as possible.
When the meter automatically shuts down due to insufficient power, the
user should charge the meter within 7 days. Otherwise the time and date
will require a reset.
The test results and all settings of the meter will be permanently stored in
the memory except the time and date.
6.2 Power On
When the instrument is turned on for the first time, the battery must be
fully charged. If the battery is low, do not turn on the instrument until the
power adapter provided with the instrument is inserted into the power jack
and connected to the external power supply. If the instrument is in power
off mode, short press the Power button and wait 2 seconds to power on.
If the instrument is in sleep mode, short press the Power button or insert a
test strip and wait 2 seconds to wake it up.
If Operator ID is set to On, the
meter automatically enters Operator
ID menu (see figure 1-1) after it is
turned on. Manually input Operator
ID and Password or obtain by
scanning (The default Operator ID
is "
admin
" and
all must be lower
case
. The default password is
"
123456
".) and touch “
” to enter
Main menu.
Please set Operator ID function
according to Section 7.8 of this
manual.
1-1