Micronova S.r.l.
-
Via A. Niedda, 3
-
35010 Vigonza (PD)
-
+39 049 8931563
-
+39 049 8931346
date 11/06/2016
page 65 of 83
Control board L023
Micronova
ENG
T
E
C
H
N
IC
A
L
M
E
N
U
(d
at
ab
as
es
)
11.12 Structure of the control board memory
The block diagram in
figure 38
briefly describes the structure of the memory and the
mode of access from the outside.
As you can see, it is possible to access the
EEPROM
memory content directly from
the console in order to read or adjust the UT and PR parameters.
The same can be done through the serial connection and the
SERAMI
software with
the use of a personal computer.
It is also clear how the content for databases o0,o1, o2, ….o9 is neither accessible
nor adjustable from the outside.
It is possible to load a database on the
EEPROM
memory through the use of the
console. The database gets added to the content of the
EEPROM
memory when
concerning the PR parameters (the UT parameters are excluded from this
procedure).
The part of the
FLASH
memory that contains the operating program is accessible
from the outside only by using the
SERAMI
and the specific firmware update files
made available by Micronova.
fig. 38
