Micronova S.r.l.
-
Via A. Niedda, 3
-
35010 Vigonza (PD)
-
+39 049 8931563
-
+39 049 8931346
date 11/06/2016
page 37 of 83
Control board L023
Micronova
ENG
U
S
E
R
O
P
E
R
A
T
IN
G
M
O
D
E
OPERATING
STATUS
OFF
START UP
8. OPERATING MODE (USER)
Here, as follows, is a description of the normal operating of the control
board that has been correctly installed in an hydro stove with regards to
the functions available to the user. The indications shown below refer to
the control board with the programmable thermostat option. In the
paragraphs that follow the technical programming mode is analyzed.
Before lighting the stove the display is presented as in
figure 16.
8.1 Lighting the stove
To light the stove hold the P4 button for a few seconds. The lighting
of the stove is signaled on the display as pictured in
figure 17
.
fig. 16
fig. 17
8.2 Lighting phase
The stove carries out the lighting phases in a sequence according to
the process defined by the settings that manage the levels and
timing. See the following table and
APPENDIXES A and C.
