ES-
50
Elevation Stage
Rev: 3.05
6
Reference Manual
MICRONIX USA,LLC
www.micronixusa.com
3.
Preparing to Install the ES-50
3.1
Installation Preparation
When mounting the stage, it is important to consider the flatness of the mounting
surface, as the stage will conform to the shape of that mounting surface. A
surface that is not flat can adversely affect the performance and structural
integrity of the stage.
The stage is calibrated and guaranteed to be within specification at 20°C ±5°C.
Be sure to use the stage under the following conditions:
▪
Mount to a clean and flat surface which is free of debris, burrs or dings
▪
An indoor atmosphere free of corrosive gasses, and condensation
▪
Temperature range of 0-40°C
▪
Relative humidity between 20-80%
▪
Locate away from water, heat, and electrical noise
3.2
Package Contents
If product is damaged or there are missing components, contact MICRONIX USA
immediately. Do not discard product packaging in case of return shipment.
Package Should Contain:
▪
ES-50 Elevation Stage
▪
15 to 9 pin Dsub Connector Cable (closed loop only)
▪
Reference Manual
▪
Any other previously agreed upon components such as a controller and
cable