Parameter
Description
Mode
It allows user to set the following mode: AP, Station, Bridge or
WDS mode.
Band
It allows user to set the AP to be fixed at 802.11b, 802.11g or
802.11n mode. Users also can select B+G+N mode to allow
the router to select among 802.11b, 802.11g and 802.11n
connection automatically.
Channel Number
The channel used by the wireless LAN. All devices in the
same wireless LAN should use the same channel.
MAC address
If users want to bridge more than one network together with
wireless LAN, it is necessary to set this access point in the
following modes: “AP Bridge-Point to Point mode”, “AP
Bridge-Point to Multi-Point mode” or “AP Bridge-WDS mode”.
Users have to enter the MAC addresses of other access
points that join the bridging work.
Set Security
Click the
<Set Security>
button for “Security Settings”
window to pop up. Users can set the security parameters
used to bridge access points together when the AP is in AP
Bridge modes.
Mode: AP Bridge-Point to Multi-Point
In this mode, users can connect your wireless router with at least four wireless
routers to expand the scope of wireless network, and all clients (wired only – AP will
not accept wireless clients in this mode) of the wireless routers will think they’re on
the same physical network.
35
