42
3. Operating status
This page shows the IP getting from ISP and the connection status.
Here only shows the status. The setting only can be changed in
Setup
Step 3
.
4. ARP table
ARP (Address Resolution Protocol) is a TCP/IP protocol used to
obtain a node's physical address. A client station broadcasts an
ARP request onto the network with the IP address of the target
node it wishes to communicate with, and the node with that
address responds by sending back its physical address so that
packets can be transmitted.
5. DHCP table
This table shows all the clients getting IP from this router. You can
see the IP, Mac address and the host name which are helpful to the
network management.
43
6. Network Traffic count
This page shows the WAN and LAN incoming and outgoing traffic
and help to easy understand the traffic flow on the network.
7. PPP connection type list
This table shows how frequency the PPP re-conncts. It helps you
for checking the ADSL line connection quality.
8. Pack log table parameter
When you enable
Pack log table
in
Basic Configuration
, there
firewall log table will be enabled in this field including
Hacker
attack log list table
,
Imcoming log table
and
Outgoing log
table
.
