13
Wireless Input/Output Unit Installation
4.3
DIP Switches
You must configure each Wireless Input/Output unit with both a PAN ID and channel ID.
For all Wireless Input/Output units on the same floor or zone, set the channel ID and PAN ID to
the same channel ID and PAN ID as the Zone Controller for that floor or zone. All devices in
the same zone should have the same channel ID and PAN ID.
Figure 10 Location of Wireless Input/Output unit DIP Switches and Connections
4.3.1 Setting the DIP Switches
Use the DIP switches to set the PAN ID and channel ID as shown in Figure 11.
See section 8.0 on page 34 for the list of DIP switch settings.
DIP switches for
PAN ID and
Channel ID
Micro USB port
for configuration
For battery
connection
Terminal for
Notification
Appliance Circuit
+
-
Summary of Contents for Fire-Link 3
Page 2: ......
