34
8.0
DIP Switch Settings for each ZC
and WIO
Each ZC (Zone Controller) and WIO (Wireless Input/Output unit) must be configured with both
a PAN ID and channel ID.
For all WIOs on the same floor or zone, set the channel ID and PAN ID to the same channel ID
and PAN ID as the Zone Controller for that floor or zone. All devices in the same zone should
have the same channel ID and PAN ID.
Refer to Figure 6 for DIP Switch location and to Figure 7 for DIP switch positioning on the ZC
and to Figure 10 and Figure 11 for the WIO DIP switch location and positioning.
8.1 Channel ID Settings
Table 4 Wireless Input/ Output unit and Zone Controller Channel ID Setting
SW 1
SW 2
SW 3
SW 4
Channel ID
OFF
OFF
OFF
OFF
11 (Freq. 2405 MHz)
OFF
OFF
OFF
ON
12 (Freq. 2410 MHz)
OFF
OFF
ON
OFF
13 (Freq. 2415 MHz)
OFF
OFF
ON
ON
14 (Freq. 2420 MHz)
OFF
ON
OFF
OFF
15 (Freq. 2425 MHz)
OFF
ON
OFF
ON
16 (Freq. 2430 MHz)
OFF
ON
ON
OFF
17 (Freq. 2435 MHz)
OFF
ON
ON
ON
18 (Freq. 2440 MHz)
ON
OFF
OFF
OFF
19 (Freq. 2445 MHz)
ON
OFF
OFF
ON
20 (Freq. 2450 MHz)
ON
OFF
ON
OFF
21 (Freq. 2455 MHz)
ON
OFF
ON
ON
22 (Freq. 2460 MHz)
ON
ON
OFF
OFF
23 (Freq. 2465 MHz)
ON
ON
OFF
ON
24 (Freq. 2470 MHz)
ON
ON
ON
OFF
25 (Freq. 2475 MHz)
ON
ON
ON
ON
26 (Freq. 2480 MHz)
Summary of Contents for Fire-Link 3
Page 2: ......
