Microlog SWL, Manual, Page: 9 / 36

2.2 VIDEO DISPLAY COMMANDS:
The split-screen option is user selectable. The ‘CTRL S’ command is
used to toggle the split-screen screen on and off. To remove the split­
screen and use the entire video display for receive text,
TYPE: ‘CTRL S’ (HOLD ‘CTRL’ KEY AND PRESS ‘S’)
2.2.1 COLOR CHANGES:
The screen and text colors can be changed with a single control
command. “CTRL G” followed by a 4 digit number will change the
following:
screen background color
receive/data
textmode display
top line status display
The f s are the same as the 64’s color codes as shown on page 139 of the
64 manual with one exception. To utilize a single digit for all 16 colors,
you must enter it in “Hexadecimal” that is 0 through F instead of 0
through 15. The colors are as follows:
0 = Black
1 = White
2 = Red
3 = Cyan
4 = Purple
5 = Green
6 = Blue
7 = Yellow
8 = Orange
9 = Brown
A = Light Red
B = Dark Gray
C = Med Gray
D = Light Green
E = Light Blue
F = Light Gray
The colors will change upon typing the forth digit. Note: The default
colors are:
(6) Blue Top line
(1) White Text buffer
(7) Yellow Receive data
(E) Light Blue Screen
These colors were picked as the best compromise for both color and
monochrome display. You can experiment with different color patterns
to suit your individual requirements. Suggestions: 0657, 1AE0, 192A,
569D, 062C.
2-2