TYPE: ‘CTRL X’
(SPEED SELECT COMMAND
NOTHING SHOWS ON THE
SCREEN)
TYPE: 66
(DESIRED SPEED)
TYPE: ‘CLR/HOME’
(OR ANY NON-NUMERIC KEY
PRINTS ])
Observe that the top line displays
R
B
0 6 6 W P M N O R
To select an RTTY (BAUDOT) speed of 100 WPM (same as 75 baud),
TYPE
TYPE
TYPE
‘CTRL X’
100
‘CLR/HOME’
Observe the speed display on the top line is now 100 WPM.
To select an RTTY (ASCII) rate of 110 baud,
TYPE: ‘CTRL A’
System will automatically go to 110 BAUD when ASCII is selected.
Observe that the top line displays A-110 BD (BAUD) where the ‘A’ in
dicates that the selected code is ASCII.
To select an RTTY (ASCII) rate of 300 baud, (no need to type ‘CTRL A’
since you are already in ASCII)
TYPE
TYPE
TYPE
‘CTRL X’
300
‘CLR/HOME’
Note, if you are in 300 BAUD ASCII, to change to any other speed or
code, you must first go to 110 BAUD ASCII. The jump from 300 BAUD
ASCII to MORSE or BAUDOT directely is not allowed.
Go back to RTTY (BAUDOT) speed of 60 WPM (Same as 45 baud),
TYPE
TYPE
TYPE
TYPE
‘CTRL B’
‘CTRL X’
60
‘CLR/HOME’
(ASCII stands for American Standard Code for Information Inter-
2-4
Summary of Contents for SWL
Page 2: ......