CHAPTER 3
‘SWL’ RADIO
CONNECTIONS
The SWL provides all of the interfaces required for direct hookup
to your receiver. For the following description refer to the rear connec
tion diagram below.
3.0 AUDIO INPUT:
Audio from your receiver is connected to the SPKR/EARPHONE
AUDIO jack on the SWL. Connect the shielded cable provided be
tween the EARPHONE or external speaker output of your receiver and
the SPKR EARPHONE input on the SWL. You will note that there are
two “SPKR EARPHONE” phono jacks on the SWL. These are con
nected internally on the board. This allows you to plug one cable from
your radio to the SWL, and one cable out to your external speaker or
headphone, eliminating the need for a “Y” connector. Refer to the
diagram showing the SWL rear connections.
CONNECT TO EITHER
EXTERNAL SPEAKER OR
EARPHONE OUTPUT OF
YOUR SHORT WAVE RADIO
3-1
Summary of Contents for SWL
Page 2: ......