36
If an error occurs during measurement, the
measurement is interrupted and an error
message «Err» is displayed.
•
Please contact your local
Microlife service center if the
error persists.
•
If you think the results
are unusual, please read
through the information
in this instruction manual
carefully.
Error
Description
Potential cause and
remedy
«
Err 1
»
Signal too
weak
The pulse signals
on the cuff are too
weak. Re-position the
cuff and repeat the
measurement.
«
Err 2
»
Error signal
During the
measurement,
error signals were
detected by the cuff,
caused for instance by
movement or muscle
tension. Repeat the
measurement, keeping
your arm still.
Error messages
ROURINE