EN
21
Taking less than three measurements
The measurement sequence can be stopped
at anytime by pushing the Start/Stop Button
«SCREEN» Mode
or
«ROUTINE»
Mode. The device
enters stand-by and the remaining measurements
are cancelled. Average of the measurements is
saved and can be viewed by pushing the M Button.
Skipping the countdown time
The 60 seconds countdown before measurement in
«SCREEN»
Mode and 15 seconds in
«ROUTINE»
Mode
can be skipped by pushing the Start/Stop Button.
While the Start/Stop Button is pushed, the device will
immediately begin the next measurement.
*
The device can be set into Stand-by Mode by pressing
the Start/Stop Button after the completion of
measurements. The device will automatically switch to
Stand-by Mode if left unattended for ive minutes.
Cancel remaining
measurements at
anytime during
the measurement
sequence.
Skip the countdown time
and begin measurement.
Stand by mode
